> 回首頁 > 正體版 > English > 簡體版 > Japanese
 
  AC Motor Drive
 
Frequency Inverter
 
- General Purpose Drive
 
- Economy Drive (RM6E1)
 
- (RM6S1)
 
- Pump Drive
 
- (RM6-9916)
 
- AC Treadmill Controller (RM6T)
 
- Plastic Injection Molding Machine Control Panel (PI5)
 
- High Protective Class Drive: IP66 (WP5)
 
- Textile Machine Controller
Auxiliary control equipment
Customer Design
AC Motor
  Vehicle Motor Drive
  Green Industry
 
Home | Products | Frequency Inverter | Economy Drive (RM6E1)
Economy Drive (RM6E1)
RM6E1 Series
Contact Us
 
 
RM6E1 Operation Manual
 
RM6E1 Catalogue
 
 
 
 
 

- Power SourceRated Power of Motor

RM6E1 100V/200V Series(1Ø)                       

■ RM6E1 100V:1Ø, 100~120V,50/60Hz              

■ RM6E1 200V:1Ø, 200~240V,50/60Hz

■ Rated Power of Moter

    - 100V :0.5HP/0.4KW~3HP/2.2KW

    - 200V :0.5HP/0.4KW~3HP/2.2KW

RM6E1 200V/400V Series(3Ø

■ RM6E1 200V:3Ø, 200~240V,50/60Hz   

■ RM6E1 400V:3Ø, 380~480V,50/60Hz

■ Rated Power of Moter

    - 200V :0.5HP/0.4KW~5HP/3.7KW

    - 400V :0.5HP/0.4KW~7.5HP/5.5KW


- Features

1.With the temperature management and fan control functions to increase the lifetime of cooling fan and saving the
   energy.
   a. User can monitor the temperature of drive and setting the pre-alarm level to forecast the maintenance cycle of
       cooling fan.
   b. Fan will be standby under idle speed, light-duty load or low surrounding temperature conditions.

2.Special function key(SPEC):
   Programmable function key for forwand/reverse running, jog speed, selection of primary/secondary frequency 
   command…etc.

3.Allow RS-485 communication interface control (Modbus RTU communication protocol).

4.6 sets of fault records:
   Record 4 types of information under fault condition,respectively. (fault code, ouput current, DC bus voltage,
   output frequency)

5.Built-in dynamic braking unit(DBU); braking level and control function are adjustable.

6.Running hours and supply power time of drive can be saved and displayed.

7.Group design for the functions ease the function setting and management.

8.Sequential operation control and PID control function.

9.Provide 8 sets of monitor displays(three of displays can be defined as another extra displays).

10.Provide PTC sensor setting functions for preventing the motor from overheating.

11.Energy-saving selection for light-duty load.

12.Auto-torque boost function.

13.Provide 16 preset speeds control.

14.The analog input signal of filter can be adjusted.

15.The response time of digital input signal is adjustable(adjustable dead band detection).

16.Independent adjustment selection of V, F for analog input signal.

17.Two sets of analog input signals can do addition, subtraction and gain control.

18.Programmable input and output terminals and two modes selection (SINK/SOURCE) for input signal.

19.User can connect KP-601 keypad(option) for remote control, parameters duplication and saving.

20.The switching frequency can be adjust between 800Hz ~ 15KHz.

Single-Phase 100V Series


Single-Phase 200V Series 


 Three-Phase 200V Series




 Three-Phase 400V Series




 
 
PRODUCTS APPLICATION SUPPORT CONTACT US NEWS LOCATION ABOUT RHYMEBUS
 
AC Motor Drive
Vehicle Motor Drive
Green Industry
Plastic&Rubber
Air Compressor
Fan & Pump
Air Conditioning System
 
Conveyor Machinery
Metal Processing
Consumer Products
Textile
Manuals
Q&A
Contact Us
Hot News
Exhibitions
New Products
Asia
Europe
Africa
America
Introduction
History
Vision
Quality Certification
Research and Development
 

Brand Story

 
ADD:No. 17, 33rd Road, Taichung Industrial Park, Taichung, Taiwan 40768 
TEL: +886-4-23595237 FAX: +886-4-23595235 E-mail : inverter@mail.rhymebus.com.tw
Copyright © 2013 Rhymebus - The Expert of Inverter | xson