products
Products & Services
Auxiliary Controllers and AC Motors
ACE-S Series
ID：ACE-S
1. ACE-S02/02B/02C Deviation Controller
2. ACE-S04/06 Ratio/Differential Setter
3. ACE-S08/09 Speed Combination Setter/Speed Feed Back Regulator
4. ACE-S10 Multifunction Controller
5. ACE-S13A/13B Signal Isolation Converter
2. ACE-S04/06 Ratio/Differential Setter
3. ACE-S08/09 Speed Combination Setter/Speed Feed Back Regulator
4. ACE-S10 Multifunction Controller
5. ACE-S13A/13B Signal Isolation Converter
01
01
Products InfoInformation
ACE-S02/02B/02C
Deviation Controller
- Convert the angle changed detected by the ADD-02 position detector (synchronizer) into a DC voltage signal. It can control the inverter to operate at the same speed, synchronous operation, and constant tension operation.
- Built-in soft starter can slowly increase or decrease the frequency setting signal to reduce the impact of the machine.
ACE-S04/06
Ratio/Differential Setter
- Built-in proportional/ equalization control function, one ACE-S04/06 can be connected to six inverters to control five sets of proportional (equalization) settings.
- Built-in soft starter can slowly increase or decrease the frequency setting signal to reduce the impact of the machine.
ACE-S08/09
Speed Combination Setter/Speed Feed Back Regulator
- Convert the signal from tach generator or photo-interruption pulse generator into an electrical signal, which is used as an inverter frequency control signal or a speed feedback signal.
- It can be used with potentiometer or deviation controller to control the constant tension, constant linear velocity and change of slack amount of cloth, thread, plastic, etc.
- It can be used for constant linear velocity control or motor constant speed control when paired with a speed generator.
- Built-in soft starter can slowly increase or decrease the frequency setting signal to reduce the impact of the machine.
ACE-S10
Multifunction Controller
Multiple Controller functions
Start, acceleration, deceleration, and stop of the inverter can be controlled from a remote location.Automatic memory operation frequency can be selected when power is off.
Traverse control function
Used in the occasion of making silk thread move around by traverse winding equipment.
Multi-segment sequential control
The program control is executed according to the set segment, and it can be executed in a loop.
ACE-S13A/13B
Signal Isolation Converter
- For the applications of input and output signal conversion (V/V, V/I, I/V, I/I), or input-output isolation requirements.
- ACE-S13A：Current output signal range is DC 0~20mA.
- ACE-S13B：Current output signal range is DC 4~20mA.
